*Piggy-back reservoir with Intrinsic-Adjust damping system: ideal for AM/FR/DH applications *3-D forged and CNC machined: 40x49mm twin-tube air canister with a 12mm aluminum, internal damper shaft and MCU negative spring *6 Independent, external settings for custom tuning: rebound damping, high/low-speed compression damping, Intrinsic pressure, No-Tools air volume/preload for bottom-out, and air-spring preload adjustability *Sized by travel/stroke and eye-eye measurements (note: not guaranteed to fit range for all bikes - check fit and travel before using) *Mounting hardware sets sold separately (2 mount sets required per shock: 1 for each eyelet) 395g (@ 2.0x7.5" size without mounting hardware) SIZES: 2.0" X 7.5" 2.0" X 7.875" 2.25" X 7.875" 2.5" X 8.5" 2.75" X 8.75" 2.75" X 9.0" 3.0" X 9.5" continue shopping... |
|
| These are the bushings to fit the Manitou shock. You need to order (2) sets for each shock. One set of bushings goes into the upper eyelet on the shock, and the other set goes on the lower eyelet. Please specify the bolt diameter of either 6 or 8 mm, and also the width for each set. The bushings fit in the shock eyelets and fill the space between the mounting tabs on your frame. |
|
